Using the memory card slot – introduction
Inserting a “Memory Stick” into PC card adaptor
Insert a “Memory Stick” with its connector side facing down.
Before inserting, check that the write protect switch is not set to LOCK position for recording a still picture.
PC card adaptor
Eject button
“Memory Stick”
To eject the “Memory Stick”
Press the eject button.
Inserting the PC card adaptor or PC card
With the upper side of the connector facing the LCD panel, insert the PC card adaptor or PC card until it clicks.
Access lamp
To eject the PC card adaptor or PC card
Slide the MEMORY RELEASE lever in the direction of the arrow as illustrated below.
MEMORY RELEASE
When the access lamp is flashing
Never shake or strike the unit. Do not turn the power off , eject a PC card adaptor/PC card or remove the battery pack. Otherwise, the image data breakdown may occur.
92