Identifying the parts
%ª
^º
%° ^¡ %§
%¶ |
|
%• | ^™ |
| |
| ^£ |
%°LANC lcontrol jack
lstands for Local Application Control Bus System. The lcontrol jack is used for controlling the tape transport of video equipment and peripherals connected to it. This jack has the same function as the jack indicated as CONTROL L or REMOTE.
%§ DV IN/OUT jack (p. 83)
This “i.LINK” mark is a trademark of Sony Corporation and indicates that this product is in agreement with IEEE
The DV IN/OUT jack is i.LINK compatible.
%¶Tripod receptacle (p. 21)
Make sure that the length of the tripod screw is less than 6.5 mm (9/32 inch). Otherwise, you cannot attach the tripod securely and the screw may damage the camcorder.
%•MEMORY RELEASE lever %ª2(headphones) jack (p. 23) ^ºAUDIO/VIDEO jack (p. 72, 82) ^¡S VIDEO jack (p. 34, 72, 82) ^™Camera recording lamp
^£MIC jack (PLUG IN POWER) (p. 87) Connect an external microphone (not supplied). This jack also accepts a
XLR adaptor
1 | 3 |
| |
| 4 |
2 | 5 |
| 6 |
1LEVEL selector (p. 63) | 4MIC IN connector (p. 63) |
2+48V switch (p. 63) | 5Cable holder |
3PUSH button (p. 63) | 6Screw (p. 63) |
140