Audio dubbing
Dubbing with the AUDIO/VIDEO jack
| Audio equipment | |
| LINE OUT | |
| L | R |
| AUDIO L | AUDIO R |
AUDIO/ |
|
|
VIDEO | A/V connecting cable |
|
|
| Do not connect the |
Ç: Signal flow |
| video (yellow) |
| plug. | |
Note
The picture is not output from the AUDIO/VIDEO jack. Check the recorded picture on the LCD screen or in the viewfinder, as well as check the recorded sound by using a speaker or headphones.
Dubbing with the
No connection is necessary.
Adding an audio sound on a recorded tape
(1) Insert your recorded tape into the camcorder.
(2) Set the POWER switch to VTR.
(3) On the camcorder, locate the point where the recording should begin by pressing 0or ). Then press Pto set it to playback pause mode.
(4) Press AUDIO DUB on the Remote Commander .
(5) Press Pon the Remote Commander and at the same time start playing back the audio you want to record.
(6) Press pon the Remote Commander at the point where you want to stop recording.
88