Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. The surround effects you will enjoy depend on the connections and components you use.
Select a connection
Select one of the following connections, A through D .
Connection | Components to be connected | |
A | (page 21) | TV (stereo) |
|
|
|
B | (page 22) | AV amplifier (receiver) having 5.1ch input jacks |
•4 speakers
(front L and R, rear L and R)
•6 speakers
(front L and R, center, rear L and R, subwoofer)
B | (page 22) | AV amplifier (receiver) having a Dolby* Digital or DTS** decoder, |
|
| and a digital input jack |
|
| • 6 speakers |
|
| (front L and R, center, rear L and R, subwoofer) |
|
|
|
C | (page 24) | Stereo amplifier (receiver) |
|
| (having L and R audio input jacks only, or having a digital input jack) |
|
| • 2 speakers |
|
| (front L and R) |
|
|
|
C | (page 24) | MD deck/DAT deck |
|
|
|
D | (page 26) | AV amplifier (receiver) with a Dolby Surround (Pro Logic) decoder |
|
| (having L and R audio input jacks only, or having a digital input jack) |
|
| • 3 speakers |
|
| (front L and R, and rear (monaural)) |
|
| • 6 speakers |
|
| (front L and R, center, rear L and R, subwoofer) |
zTo enjoy SACD Multi or 96 kHz/24 bit sound, use connection B .
*Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the
**Manufactured under license from Digital Theater Systems, Inc. US PAT. No. 5,451,942 and other
20