TVS STANDARD
Uses sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. Use this setting when you want to use TVS with 2 separate speakers and retain the sound quality.
LR
L:Left front speaker
R:Right front speaker 
: Virtual speakers
For 4 to 6 speaker setups
You can enjoy the following surround effects by using the 2 front speakers and 2 rear speakers.
Connect the player to the amplifier (receiver) with the
You can experience Dolby Surround (Pro Logic) sounds or Digital Cinema Sound (DCS). DCS uses sound imaging to shift the sound of the rear speakers away from the actual speaker position or create entire sets of virtual rear speakers from one set of actual rear speakers. “VIRTUAL REAR SHIFT,” “VIRTUAL MULTI REAR,” and “VIRTUAL MULTI DIMENSION” make use of this technology.
NORMAL SURROUND
Software with 2 channel audio signals is decoded with the Dolby Surround (Pro Logic) decoder to create surround effects. The rear speakers will emit identical monaural sounds. If you are using a center
speaker, the appropriate sounds for the center speaker will be delivered.
LR
LSRS
ENHANCED SURROUND
Provides a greater sense of presence from a Dolby Surround (Pro Logic) source with a monaural rear channel signal. Produces a stereo like effect in the rear channels.
VIRTUAL REAR SHIFT
Uses sound imaging to shift the sound of the rear speakers away from the actual speaker position.
The virtual speakers are reproduced as shown in the illustration below. The shift position differs according to “REAR” or “SIDE” setting of the rear speakers (page 86).
REAR
LR
LSRS
SIDE
LR
LS | RS |
60