Notes

•The player can store the settings of up to 50 discs. When you store the setting of disc number 51, the first disc setting is canceled.

•The Playback Memory function cannot be used for DVD-RWs in VR mode.

•During playback, do not turn off the player by pressing POWER on the player. Doing so may cancel the settings. When you turn off the player, press xfirst to stop playback and then press [/1on the remote. After the power indicator lights up in red and the player enters standby mode, press POWER on the player.

xTRACK SELECTION (DVD VIDEO

only)

Gives the sound track which contains the highest number of channels priority when you play a DVD on which multiple audio formats (PCM, DTS or Dolby Digital format) are recorded.

OFF

No priority given.

 

 

AUTO

Priority given.

 

 

Notes

•When you set the item to “AUTO,” the language may change. The “TRACK SELECTION” setting has higher priority than the “AUDIO” settings in “LANGUAGE SETUP” (page 78).

•If PCM, DTS and Dolby Digital sound tracks have the same number of channels, the player selects PCM, DTS and Dolby Digital sound tracks in this order.

xCD DIRECT

Eliminates the use of unnecessary circuits when playing CDs. The setting will be activated when you press DISC SKIP. This function affects the output of the following jacks:

–LINE OUT L/R (AUDIO) 1/2 jacks

–5.1CH OUTPUT jacks

–PHONES jack

OFF

Select this when playing CD

 

discs, including CD type DTS

 

discs.

 

 

ON

Eliminates the use of

 

unnecessary circuits needed to

 

play CDs.

 

 

Note

If you select “ON” when playing CD type DTS discs, the sound will become noisy.

82