6 Press H on the player to start playing.

Playback starts and the display shows the current disc and track numbers and the playing time of the track. While the MEGA CONTROL button on the front panel is lit, you can control CD changer with the controls on the player as follows:

To

Operation

 

 

Select a disc during

Press the number

playback

button on the remote

 

and ENTER, or X/

 

x and ENTER

 

 

Stop

Press x

 

 

Pause

Press X

 

 

Resume play after pause

Press Xor H

 

 

Go to the next track or

Press >

scene in continuous play

 

mode

 

 

 

Go back to the preceding

Press .

track or scene in

 

continuous play mode

 

 

 

To control the player again

Press MEGA CONTROL on the player. The MEGA CONTROL button on the player turns off and you can control the player.

Notes

•Connect only a Sony 5/50/200/300/400 CD changer to MEGA CONTROL jack.

•Set CONTROL A1 or CONTROL A1II in the setup menu of the CD changer so that it matches the connection made above. Refer to the operating instructions supplied with the CD changer.

•You cannot locate a particular point on a CD’s track using the controls on the player.

•Depending on the CD changer, some controls on the player may not operate the CD changer as they do the player.

•You cannot control the player when the MEGA CONTROL button on the front panel is lit.

•The player will not enter Resume Play after the MEGA CONTROL button on the front panel has been turned on and off.

•You cannot control the CD changer right after turning on the player or connecting the CD changer. Wait a few seconds until the player recognizes the CDs.

•When the MEGA CONTROL button is lit, you cannot use the Control Menu.

76