You will hear one beep and the Sound Feedback function is turned on.
To turn off the Sound Feedback
function
When there is no disc in the player, press and hold X on the player for more than two seconds. You will hear two beeps and the Sound Feedback function is turned off.
Controlling Your TV or AV Amplifier (Receiver) with the Supplied Remote
By adjusting the remote signal, you can control your TV with the supplied remote. If you connect the player with an AV amplifier (receiver), you can control the volume with the supplied remote.
Notes
•Depending on the units being connected, you may not be able to control your TV or AV amplifier (receiver) using some of the buttons below.
•If you enter a new code number, the code number previously entered will be erased.
•When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.
Controlling TVs with the remote
TV/DVD
switch
?/1
| 1 | 2 | 3 | VOL +/– | |
Number | 4 | 5 | 6 | ||
TV/VIDEO | |||||
buttons | 7 | 8 | 9 | ||
|
| 0 |
| WIDE MODE |
ENTER
1 Slide the TV/DVD switch to “TV.”
2 Hold down ?/1, and enter your TV’s manufacturer’s code (see the table) using the number buttons.
3 Release ?/1.
Functions Additional Various Using
continued ,
73