Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume and the balance of the speakers to the same level.
This setting is effective when connecting the speaker with 5.1CH OUTPUT jacks (page 22).
Select “SPEAKER SETUP” in the setup display. For details, see “Using the Setup Display” (page 77).
The default settings are underlined.
SPEAKER SETUP
SIZE:
DISTANCE: |
|
|
| |
|
|
| ||
BALANCE: |
|
|
| |
LEVEL: | OFF | |||
TEST TONE: | ||||
| FRONT: |
| LARGE | |
| CENTER: |
| LARGE | |
| REAR: | LARGE(REAR) | ||
| SUBWOOFER: |
|
| YES |
To return to the default setting
Select the item, then press CLEAR. Note that only the SIZE setting does not return to the default setting.
xSIZE
Selects the size of the speakers to be connected.
• FRONT
LARGE Normally select this position.
SMALL When the sound cracks or the surround sound effects are difficult to hear, select this. This activates the bass redirection circuitry and outputs the bass frequencies of the front speaker from the subwoofer.
• CENTER
NONE If you do not connect a center
speaker, select this.
LARGE Normally select this position.
SMALL When the sound cracks or the surround sound effects are difficult to hear, select this. This activates the bass redirection circuitry and outputs the bass frequencies of the center speaker from other speakers.
• REAR
NONE If you do not connect rear speakers, select this.
LARGE (REAR/SIDE): Normally select this position. Select either of these according to the rear speaker’s position*.
SMALL (REAR/SIDE): When the sound cracks or the surround sound effects are difficult to hear, select this. Select either of these according to the rear speaker’s position*.
This activates the bass redirection circuitry and outputs the bass frequencies of the rear speaker from other speakers.
* Rear speaker position
Correctly specify the location of the rear speakers to enjoy the surround effect.
•Set to the “SIDE,” if the location of the rear speakers corresponds to section A below.
•Set to the “REAR,” if the location of the rear speakers corresponds to section B below.
This setting affects only “VIRTUAL REAR SHIFT,” “VIRTUAL MULTI REAR,” and “VIRTUAL MULTI DIMENSION” mode (page 58).
These settings do not affect the SACD Multi audio signals.
90
45
20
86