xBALANCE
You can vary the balance of the left and right speakers as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment.
The default adjustments are in parentheses.
FRONT Adjust the balance between the
(0dB) front left and right speakers (– 6dB [L] to +6dB [R], 0.5dB increments).
REAR (0dB) Adjust the balance between the rear left and right speakers (– 6dB [L] to +6dB [R], 0.5dB increments).
xLEVEL
You can vary the level of each speaker as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment.
The default adjustments are in parentheses.
FRONT (0dB) | Adjust the level of the front |
| speakers |
| dB increments). |
|
|
CENTER | Adjust the level of the center |
(0dB) | speaker |
| 0.5dB increments). |
|
|
REAR (0dB) | Adjust the level of the rear |
| speakers |
| 0.5dB increments). |
|
|
SUBWOOFER | Adjust the level of the |
(0dB) | subwoofer |
| 0.5dB increments). |
|
|
To adjust the volume of all the
speakers at one time
Use the amplifier’s (receiver’s) volume control.
xTEST TONE
The speakers will emit a test tone. Use this when you use the 5.1CH OUTPUT jacks and adjust the “BALANCE” and “LEVEL.”
OFF | The test tone is not emitted from |
| the speakers. |
|
|
ON | The test tone is emitted from |
| each speaker in sequence while |
| adjusting balance or level. |
| When you select one of the |
| “SPEAKER SETUP” items, the |
| test tone is emitted from both left |
| and right speakers simultaneously. |
|
|
Adjusting the speaker volume and level
1 Select “SPEAKER SETUP” in the Setup Display.
2 Select “TEST TONE” and set to “ON.”
You will hear the test tone from each speaker in sequence.
3 From your listening position, select “BALANCE” or “LEVEL” and adjust the value of “BALANCE” using C/c and “LEVEL” using X/x.
The test tone is emitted from both left and right speakers simultaneously.
4 Select “TEST TONE” and set to “OFF” to turn off the test tone.
Notes
•When you adjust the speaker settings, the sound cuts off for a moment.
•The test tone signals are not output from the digital jack.
88