Sony DXC-990 TARGET COLOR, CCD MODE, SHADING COMP. (Shading Compensation), ALL, OUT, OFF, RANGE, FIELD, FRAME, RANGE, object, ) appearing in, color with the

TARGET COLOR

Select when adjusting DETAIL or LINEAR MATRIX for a specific color.

This item is displayed only when you set either DETAIL or LINEAR MATRIX to

TARGET.

ALL

Adjusts DETAIL or LINEAR MATRIX for the whole image. Normally, set to this position.

IN

Adjusts DETAIL or LINEAR MATRIX for a specific color.RANGEFinely adjusts the area in the range–10from

to +10.

To specify a color

GENERAL Menu

The GENERAL menu is used to set the general items.

<GENERAL>	[A]
>CCD MODE	FIELD
SHADING COMP.	OFF
TRIGGER	OFF
NEGA	OFF

FLICKER CANCELLER OFF

Select MENU Back

CCD MODE

Selects the CCD read-out mode.

FIELD

Accumulates charges in field units.

1 Press the ENTER button.		Use to shoot a moving object.
2 Move the cross cursor (	) appearing in
the center of the screen to the desired
		FRAME
color with theB,b,V orv button so that
the cross cursor square covers the desired
		Accumulates charges in frame units.
color, then press the ENTER button.
		Provides the image with the highest possible
You can adjust the color indicated by the
cross cursor (	).	vertical resolution. Use to shoot a still
		object.

OUT

Adjusts DETAIL or LINEAR MATRIX for colors other than a specified color.

RANGE

Finely adjusts the area in the range–10from

to +10.

When you select OUT, then set the color with the procedure in “To specify a color,” you can adjust DETAIL or LINEAR MATRIX for colors other than that indicated

by the cross cursor ( ).

SHADING COMP. (Shading Compensation)

Eliminates green or magenta color which may appear at the top or bottom of the screen, when the camera is used with an optical instrument.

OFF

Color elimination does not function.

ON

If green or magenta color appears at the top or bottom of the screen when the camera is attached to a microscope, etc., select this setting.

GB 18 GENERAL Menu