Sony DXC-990 Front Panel/Top Panel, Rear Panel, 1Boss, 2Lens Mount, 3Mount lever, 7LENS connector (6-pin), 5TRIG IN connector (BNC type), 8VIDEO OUT connector (BNC type)

Location and

Functions of Parts

and Controls

Front Panel/Top Panel

1

2

3

4

Rear Panel

					qs
					qd
5					qf
		MENU	BLACK		qg
	TRIG IN
		FILE		BARS
			WHITE
		SELECT			qh
				ENTER	qj
	RGB/SYNC
			LENS	MENU LOCK	qk
6				ON
7	VIDEO OUT			OFF
		VBS	GEN LOCK		ql
		DC IN/
8
9		REMOTE

0 qa

1Boss

Attach the supplied lens mount stopper to prevent the lens from getting loose.

2Lens Mount

Attach a zoom lens or microscope adaptor.

3Mount lever

Fasten the lens by turning the mount lever clockwise after attaching the lens.

4Installation/tripod holes (top and bottom panels)

Use these holes when attaching the

camera to a wall or ceiling, or a tripod. (screw: 1/4″ , UNC20)

5TRIG IN connector (BNC type)

Connects to a commercially available slave unit by converting to BNC type in strobe mode.

6RGB/SYNC connector (D- sub 9-pin)

Outputs RGB signals and their respective sync signals.

Use the CCXC-9DB/CCXC-9DD/ CCMC-9DS connecting cable for the connection with the CMA-D2/D2MD/ D2CE/D2MDCE camera adaptor.

For connection with the CMA-D3/ D3CE camera adaptor, use the CCMC- 3MZ connecting cable.

7LENS connector (6-pin)

Connects to a lens cable when attaching the 2/3-inch zoom lens. This connector is not used for the 1/2-inch zoom lenses.

8VIDEO OUT connector (BNC type)

Outputs a composite video signal.

9 DC IN/VBS (DC input/ video signal output) connector (12-pin)

Connects to the CMA-D2/D2MD/ D2CE/D2MDCE/D3/D3CE camera adaptor. Inputs the DC power and outputs the VBS signal.

Overview

Location and Functions of Parts and Controls 7 GB