Sony DXC-990 12P CONNECTOR, When an External Sync, (HD/VD Lock), Signal (VBS Signal) Is Input, (VBS Lock)

RGB	SC. PHASE ROUGH
	Roughly adjusts the subcarrier phase by

Adds sync signals to the G, B and R signals
output from the RGB/SYNC	setting to°0or 180°.
connector.	SC. PHASE FINE

12P CONNECTOR

Finely adjusts the subcarrier phase within the range from–127 to +127.

Switches the input and output of the DC When an External Sync
IN/VBS	connector (12-pin) and selects	Signal (HD/VD Signal) Is Input
the output signal.		(HD/VD Lock)

IN

Functions as the input connector.

OUT

Functions as the output connector.

SIGNAL
Selects the output signal from the		DC
IN/VBS	connector.

HD/VD: Outputs the HD/VD signal.C. SYNC: Outputs the composite sync signal.

The following item appears.

Adjusts the horizontal phase to synchronize the camera operation with the reference signal.

H. PHASE

Adjust the level within the range–from20 to +127.

Note

Turn on the external sync signal generator after all equipment is switched on.

Note

When the CMA-D3/C3CE is connected to the camera with the CCMC-3MZ connecting cable, you cannot set this item. Switch between input and output with the IN/OUT switch on the CMA-D3/D3CE camera adaptor.

For details, refer to the operating instructions of the CMA-D3/D3CE.

When an External Sync

Signal (VBS Signal) Is Input

(VBS Lock)

Menus with Setting and Adjusting

The following items appear. Adjusts the horizontal phase and SC (subcarrier) phase to synchronize the camera operation with the reference signal.

H. PHASE

Adjusts the horizontal phase within the range from–20 to +127.

SYSTEM Menu 21 GB