BInstallation and Connections

Installation

Mounting the Lens

Only 1/2-inch bayonet-mount lenses can be attached to the camera.

For 2/3-inch lenses, an LO-32BMT lens mount adaptor (not supplied) is required.

Note

After mounting the lens, be sure to attach the supplied lens mount stopper to prevent the lens from getting loose.

1 Turn the mount lever counterclockwise as far as it goes.

(If the lens mount cap is in place, remove it.)

2 Align the positioning pin on the lens with the matching hole in the lens mount and attach the lens (not supplied).

Lens mount

3 Turn the mount lever clockwise as far as it goes to lock the lens in the lens mount.

4 Attach the supplied lens mount stopper to the boss on the camera.

Lens mount stopper

5 Connect the lens cable to the LENS connector on the camera.

(This step is not necessary for 1/2-inch lenses.)

GB 26 Installation