Sony EX Getting Started, Resetting the unit, Setting the clock and the calendar

Getting Started

Resetting the unit

Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit.

Press the reset button with a pointed object, such as a ballpoint pen.

After the reset is complete, the pre-stored images are displayed. Press (IMAGE) on the card remote commander to show the clock display and set the clock and calendar.

Reset button

Notes

•Pressing the reset button will erase the clock/ calendar setting and some stored contents.

•The unit starts to perform initial setting for 10 seconds after you press the reset button. During this, do not insert a disc or “Memory Stick,” otherwise the unit may not be reset. Should this occur, press the reset button again.

•The unit makes some noise during the initial settings, this is not a malfunction.

Setting the clock and the calendar

The clock uses a 24-hour digital indication (Day/ Month/Year Time).

The factory setting is “01/01/2002 01:00.”

1Press (MENU).

2Press <or ,repeatedly to select “Setup.”

3Press (ENTER).

4Press M or mrepeatedly to select “Clock.”

5Press (ENTER).

1Press Mor m repeatedly to set the day.

Each time you press M, the number of the day increases.

Each time you press m, the number of the day decreases.

2Press ,to move to the month, then press Mor mrepeatedly to set the month.

3Repeat step 2to set the year, the hour, and the minute.

6Press (ENTER).

The settings for clock and calendar are stored, and the display returns to the normal display.

Note

If your car has no ACC position, turn on the power of this unit first, then set the clock and the calendar.

Tip

You can set the year from 2000 to 2099.

18