Setting the display characters

—Char Setup (Spectrum analyser/Panorama/ Wall paper/Screen saver/Slide show mode)

You can adjust the visibility of the display by changing the translucence ratio of the display characters.

Making display characters disappear automatically (Auto Clear)

You can make display characters disappear for a moment in Spectrum analyser/Panorama/Wall paper/Screen saver/Slide show mode. When set to ON, you can display the display characters only when the disc, album, or track is changed or the source or display mode is changed. You can enjoy full images.

1Playback or receive the source (radio, CD, MS, MD, or AUX).

2Press (GRAPHIC).

3Press <or ,repeatedly to select “Char Setup.”

Each time you press <or ,, the item changes as follows:

Wall Paper yPanorama yJacket Pic yClipMotion ySlide Show y Picture Del yChar Setup

4Press (ENTER).

5Press M or mto select “Auto Clear.”

6Press (ENTER).

7Press M or mto select “ON.”

8Press (ENTER).

9Press (GRAPHIC).

The display returns to the normal display.

Note

In Standard/Clock mode, you cannot make the display characters disappear automatically.

Changing the translucence ratio of the characters (Blend Level)

You can set the translucence ratio (colour density) of the characters in the Spectrum analyser/Panorama/Wall paper/Screen saver/ Slide show mode.

By setting this level down, you can adjust the characters in the display to appear opaque.

1Playback or receive the source (radio, CD, MS, MD, or AUX).

2Press (GRAPHIC).

3Press <or ,repeatedly to select “Char Setup.”

Each time you press <or ,, the item changes as follows:

Wall Paper yPanorama yJacket Pic yClipMotion ySlide Show y Picture Del yChar Setup

4Press (ENTER).

5Press M or mto select “Blend Level.”

6Press (ENTER).

7Press <or ,to select the permeation ratio (Level 0-15).

The lower the level, the paler the display characters.

8Press (ENTER).

9Press (GRAPHIC).

The display returns to the normal display.

Notes

•In Standard/Clock mode, you cannot change the translucence ratio of the display characters.

•Set “Auto Clear” to “ON” (page 40), the translucence ratio of the display characters does not change.

40