—ClipMotion (Standard mode)
You can store your favourite GIF image or GIF animation file for each source and display them in the source display area in the Standard mode.
The image data you set will be stored in this unit.
1Insert a “Memory Stick” (page 10).
2Select a source (radio, CD, MD, MS, or AUX) that you want to set a clip motion.
3Press (GRAPHIC).
4Press <or ,repeatedly to select “ClipMotion.”
Each time you press <or ,, the item changes as follows:
Wall Paper yPanorama yJacket Pic yClipMotion ySlide Show y Picture Del yChar Setup
5Press (ENTER).
6Press Mor mto select “Memory Stick.”
If you want to change the display type of a previously stored image, select “FlashMemory.”
7Press (ENTER).
If you select “FlashMemory” in step 6, skip to step 8.
8Press Mor mrepeatedly to select a location or type of image that you want to set.
Picture Select: If an image you want to set is in the first layer of a “Memory Stick,” select this.
(Folder name): When a folder is in a “Memory Stick,” the folder name is displayed.
9Press (ENTER).
Select the folder name in step 8. If there are images in folders of a lower layer, repeat step 8 and 9 to select the folder which contains your desired image.
An image can be set in up to the 5th layer folder in a “Memory Stick.”
10 Press <or ,repeatedly to select the image you want to set.
11 Press (ENTER).
12 Press Mor m to select “Setup.”
13 Press (ENTER).
14 Press Mor m to select the display type.
You can select one of the following 2 display types.
Normal: displays the image you select in step 10.
Just: adjusts and displays the selected image according to the display size.
15 Press (ENTER).
Example: Just
16 Press Mor m to select “Save.” 17 Press (ENTER).
continue to next page t
37