10 Press <or ,repeatedly to select the image you want to set.
11 Press (ENTER).
12 Press M or mto select “Setup.”
13 Press (ENTER).
14 Press M or mto select the display type.
You can select one of the following 2 display types.
Normal: displays the image you select in step 10.
Just: adjusts and displays the selected image according to the display size.
15 Press (ENTER).
Example: Just
Notes
•You can set the image format as follows: JPEG: 1,600 ⋅1,200 dots or less
BMP, GIF, PNG: 640 ⋅480 dots or less
•You can preview up to 100 images from a folder within a “Memory Stick” at one time.
•The following folders in a “Memory Stick” cannot be displayed.
–CONTROL
–DCIM
–MSSONY
–VOICE
–HIFI
•In step 7 or 9, if there is no image data, “No Picture” is shown in the display.
•Depending on the volume of stored data, the storing time differs. Do not turn off the unit while the message in step 17 is displayed. If you turn off the power, the data will not be stored.
•If the capacity of the unit is not enough, “MEM FULL
–delete data” is displayed and you cannot store the data. After deleting the data (page 39), perform the settings again.
Tips
•You can store a maximum of 100 jacket pictures in the unit.
•If
16 Press M or mto select “Save.” 17 Press (ENTER).
18 Press (GRAPHIC).
The display returns to the normal display. Press (SCREEN) to turn to the Standard mode.
36