Setting a panorama image

—Panorama (Panorama/Wall paper mode)

Scrolls a static image in a “Memory Stick” or displays it in tile.

The image data you set will be stored in this unit. To display the pre-stored images in this unit, see “Selecting the display mode and display pattern” on page 13.

1Insert a “Memory Stick” (page 10).

2Press (GRAPHIC).

3Press <or ,repeatedly to select “Panorama.”

Each time you press <or ,, the item changes as follows:

Wall Paper yPanorama yJacket Pic yClipMotion ySlide Show y Picture Del yChar Setup

4Press (ENTER).

5Press (ENTER) again.

6Press M or mrepeatedly to select a location or type of image that you want to set.

Picture Select: If an image you want to set is in the first layer of a “Memory Stick,” select this.

Cyber-shot:If you want to set a picture taken by an optional Sony digital still camera Cyber-shot, select this.

(Folder name): When a folder is in a “Memory Stick,” the folder name is displayed.

7Press (ENTER).

Select the folder name in step 6. If there are images in folders of a lower layer, repeat step 6 and 7 to select the folder which contains your desired image.

An image can be set in up to the 5th layer folder in a “Memory Stick.”

8Press <or ,repeatedly to select the image you want to set.

9Press (ENTER).

Depending on the aspect ratio the selected image, the display type will be set automatically.

1:1 to 1:4 – tile

more than 1:4 – scroll horizontally below 1:1 – scroll vertically

10Press (ENTER) again.

11Press (GRAPHIC).

The display returns to the normal display. Press (SCREEN) to turn to the Panorama/ Wall paper mode. Then the adjusted panorama image is displayed.

Notes

•You can set the image format as follows: JPEG: 1,600 ⋅1,200 dots or less

•You can set the display while the unit must be kept on.

•You can preview up to 100 images from a folder within a “Memory Stick” at one time.

•The following folders in a “Memory Stick” cannot be displayed.

–CONTROL

–DCIM

–MSSONY

–VOICE

–HIFI

•In step 5 or 7, if there is no image data, “No Picture” is shown in the display.

•Depending on the volume of stored data, the storing time differs. Do not turn off the unit while the message in step 10 is displayed. If you turn off the power, the data will not be stored.

•If the capacity of the unit is not enough, “MEM FULL

–delete data” is displayed and you cannot store the data. After deleting the data (page 39), perform the settings again.

Tips

•You can store a maximum of 100 panorama images in the unit.

•If “Cyber-shot” is selected in step 6, the folder is selected automatically.

34