SoundTuning
•EQ7 Tune (page 43) — to adjust the equaliser curve.
•HPF (High pass filter) (page 44)
•LPF (Low pass filter) (page 45)
•Loudness — to enjoy bass and treble even at low volumes. The bass and treble will be reinforced.
•AUX Level*3 (page 45) — to adjust the volume level of connected auxiliary equipment.
*1 Displayed only when the clock is displayed by pressing (OFF).
*2 Displayed only when CD, MS, or MD are playing back.
*3 Displayed only when the source is AUX.
Note
Only when an optional CD/MD unit is not connected, “AUX Skip” and “AUX Level” are displayed.
1Press (MENU).
To set “AutoScroll,” press (MENU) during CD/MD/MS playback.
2Press <or ,repeatedly to select the desired item.
3Press (ENTER).
4Press Mor mrepeatedly to select your desired items to be adjusted.
5Press (ENTER).
6Press M or mrepeatedly to select the desired setting (Example: “ON” or “OFF”).
7Press (ENTER).
The display returns to the top menu display.
8Press (MENU).
The display returns to the normal display.
Note
The displayed item will differ depending on the source.
If your speakers are installed into the lower part of the doors, the sound will come from below and may not be clear.
The DSO (Dynamic Soundstage Organiser) function creates a more ambient sound as if there were speakers above the dashboard (virtual speakers).
You can store the DSO setting for each source.
DSO mode and image of virtual speakers
*3 
*3
*1
*1
*2
*2 | *4 |
| |
| *4 |
*1 DSO 1
*2 DSO 2
*3 DSO 3
*4 DSO OFF
1Press (SOURCE) to select a source (radio, CD, MD, MS, or AUX).
2Press (SOUND).
3Press <or ,repeatedly to select “DSO.”
4Press (ENTER).
5
6
Press <or ,repeatedly to select the
DSO mode (DSO
To cancel the DSO function, select “OFF.”
Press (ENTER).
Notes
• Depending on the type of car interior or type of music, DSO may not have a desirable affect.
• If FM broadcasts are difficult to hear, set “DSO” to “OFF.”
Tip
The sound effect of the DSO mode increases as the number increases.
42