14 Press Mor mrepeatedly to select the display type.

You can select the display type from 3 types as follows.

Center: displays the image you have adjusted in the centre of the display.

Tile: displays the selected images lined up horizontally.

Full: adjusts and displays the selected image according to the display size.

15 Press (ENTER).

Example: Tile

16 Press Mor mto select “Save.” 17 Press (ENTER).

18 Press (GRAPHIC).

The display returns to the normal display. Press (SCREEN) to turn to the Standard mode or the Panorama/Wall paper mode. Then the adjusted wall paper is displayed.

Standard mode:

Panorama/Wall paper mode:

Notes

•You can set the image format as follows: JPEG: 1,600 ⋅1,200 dots or less

BMP, GIF, PNG: 640 ⋅480 dots or less

•You can set the display while the unit must be kept on.

•You can preview up to 100 images from a folder within a “Memory Stick” at one time.

•The following folders in a “Memory Stick” cannot be displayed.

–CONTROL

–DCIM

–MSSONY

–VOICE

–HIFI

•In step 6 or 8, if there is no image data, “No Picture” is shown in the display.

•Depending on the volume of stored data, the storing time differs. Do not turn off the unit while the message in step 17 is displayed. If you turn off the power, the data will not be stored.

•If the capacity of the unit is not enough, “MEM FULL

–delete data” is displayed and you cannot store the data. After deleting the data (page 39), perform the settings again.

Tips

•You can store a maximum of 100 wall papers in the unit.

•If “Cyber-shot” is selected in step 7, the folder is selected automatically.

About the pre/user strage area capacity

The image is stored in the “Wall Paper” user area.

Standard mode:

Panorama/

 

Wall paper mode:

A

D

B

E

 

C

B

 

 

C

APre-stored spectrum analyser B Pre-stored wall papers

C User area of “Wall Paper” D Pre-stored panorama images E User area of “Panorama”

Tip

Stored images may not display in order of they were stored.

33