Releasing the time code synchronization

First disconnect the external time code, then set the F-RUN/SET/R-RUN

switch to R-RUN.

Changing the power supply from the battery pack to an external power supply during time code synchronization

To maintain a continuous power supply, connect the external power supply to the DC IN connector before removing the battery pack. You may lose time code synchronization if you remove the battery pack first.

Camera synchronization during time code synchronization

During time code synchronization, the camera is genlocked to the reference video signal input from the GENLOCK IN connector.

4

Chapter 4 Adjustments and Settings for Recording 4-27