OFF: No zebra pattern is displayed.
MOMENT: The zebra pattern is displayed and stays for 5 to 6 seconds. The zebra pattern is factory set to indicate picture areas where the
video level is approximately 70%. The setup menu can be used to 2 specify that areas where the video level is 100% and above are to be displayed at the same time.
For information about how to set the zebra pattern is to be displayed to indicate areas of 100% or more, see Section
7TALLY switch
This switch controls the TALLY indicator, setting its brightness (HIGH or LOW) or turning it off.
HIGH: The TALLY indicator gets brighter.
OFF: The TALLY indicator does not operate.
LOW: The TALLY indicator gets dimmer.
8Diopter adjustment ring
Use this ring to adjust the viewfinder image for your vision.
(Continued)
Chapter 2 Locations and Functions of Parts and Controls