recorded video signal, you have to attach an HDCA-901 Camera Adaptor (not supplied). Since recorded HD SDI video signals are output to the HD SDI OUT connector of the HDCA-901, you can see a recorded video signal on the monitor connected to the HD SDI OUT connector.

At the SDI/VF/MON default setting, the recorded video signals are output to the viewfinder, MONITOR OUT connector and HD SDI OUT connector during play back.

4

The question mark (?) changes back to the arrow (→ ) to confirm the setting.

5 To continue setting other items, repeat steps 3 and 4.

6 To end menu operations, turn the DISPLAY switch to ON.

The menu disappears from the viewfinder screen, and the display indicating the current status of the camcorder appears along the top and bottom of the viewfinder screen.

4-8-9 Saving or Reading Setup Data to or from the Memory Stick

Use the OPERATOR FILE page of the OPERATION menu to save the setup data of OPERATION menu pages 1 to 8 to or read the data from a memory stick.

Note

Settings for OVERRIDE on the AUTO IRIS page and D5600K on the OTHERS page are not saved.

For detailed information on operations on the OPERATOR FILE page, see “4-11-2

Using Data on the Memory Stick” on page 4-93.

(Continued)

Chapter 4 Adjustments and Settings for Recording 4-69