6
5 Check each of the following operations and make sure that the 
indicator lights if the corresponding item has been turned on in the '!' IND page.
(1)Set the gain to anything but 0 dB by using the GAIN selector and the GAIN SW page of the OPERATION menu.
(2)Set the SHUTTER selector to ON.
(3)Set the WHITE BAL switch to PRST.
(4)Use the lens extender.
(5)Set the FILTER selector to anything but “ 1B".
6 Push the SHUTTER selector from ON to SEL repeatedly, and check that the shutter setting changes on the viewfinder screen.
7 Pointing the camera at a suitable subject, focus the camera and check the picture on the viewfinder screen.
8 Set both of the AUDIO IN switches to FRONT, and check that when sound is input to a microphone connected to the MIC IN connector on the front of the camcorder, the audio level indication appears on the viewfinder screen.
9 Check that setting the ZEBRA switch to ON and OFF makes the zebra pattern appear and disappear on the viewfinder screen.
Note
The current display status may inhibit one or more of the displays or operations mentioned in steps 3 to 9. If this happens, set the desired items in the VF DISPLAY page of the OPERATION menu.