5-5-3 Attaching a UHF Portable Tuner (for a UHF Wireless Microphone System)

To use a Sony UHF wireless microphone system, fit the WRR-810A/ 860A UHF Portable Tuner. For each of these UHF portable tuners, use the following attachment procedure. (The WRR-860A is taken as an example below.)

Refer to the UHF portable turner manual for more information.

Using a BP-L60A Battery Pack

1 (1) Attach the tuner fitting (not supplied) to the back of the

5 camcorder.

1 Pass a screwdriver through the holes and tighten the screws. 2 Loosen the adjustment screws.

3 Adjust the metal fitting position for a BP-L60A Battery Pack to be attached, and tighten the adjustment screws to fix its position.

4 Attach the BETACAM holder kit supplied with the tuner.

(2)Attach the battery pack.

For more information about attaching the BP-L60A Battery Pack, see

Section 5-1-1 “Using a BP-L60A Battery Pack” (page 5-1).

Back of camcorder

BP-L60A

Adjustment screws

WRR tuner fitting

BETACAM holder kit

Holes

5-22Chapter 5 Setting Up the Camcorder