Sony FWD-50PX1 Location and Function of Parts and Controls, 3SPEAKER Socket, 4 - AC IN socket, 6Connector panel, 1Indicator section, 2Control button section

Location and Function of Parts and ControlsFront / Rear / Right Side

Front

1

Rear

2 3 4 5

Right side

6

Location and Function of Parts and Controls

1Indicator section

For details on the Indicator section, see “Indicator Section” on page 8 (GB).

2Control button section

For details on the control button section, see “Control Button Section (Top)” on page 8 (GB).

3SPEAKER Socket

The audio component of the signal displayed on the screen is output when speakers (not supplied) are connected to this socket.

4 - AC IN socket

Connect the supplied AC power cord to this socket and to a wall outlet. Once you connect the AC power cord, the POWER/STANDBY indicator lights up in red and the display turns to the standby mode.

For more details on the power cord, see “Connecting the AC Power Cord” on page 14 (GB).

5Stand installation hooksUse these hooks to install the stand (not supplied).6Connector panel

For details on the connector panel, see “Connector Panel” on page 9 (GB).

7 (GB)