Location and Function of Parts and Controls

Optional adaptors (Not supplied)

The VIDEO connectors are slot-in connectors. You can install any of the following adaptors in the display.

For details on installation, consult your Sony dealers.RGB/COMPONENT INPUT ADAPTOR BKM- FW11 (Not supplied)

1

 

AUDIO

2

INPUTCOMPONENT/RGB

RRPHD/R/C VD

 

 

3

ADAPTOR

B/B/CBP

 

 

Y/G

COMPONENT/RGB input connectors

1AUDIO (Stereo minijack) : Inputs audio signal. Connects to the audio signal output of a piece of video equipment or a computer.

2HD VD (BNC-type) : Connects to the synchronous signal output of a computer.

3Y/G, PB/CB/B, PR/CR/R (BNC-type) :Connects to the component signal output or analog RGB signal output of a piece of video equipment or a

computer.
RGB/COMPONENT ACTIVE THROUGH ADAPTOR BKM-FW12 (Not supplied)

1

 

AUDIO IN

2

RGB/COMPONENT

OUT

 

 

3

THROUGH

IN

 

1AUDIO IN (Stereo minijack) :

Inputs audio signal. Connects to the audio signal output of a piece of video equipment or a computer.

2RGB/COMPONENT OUT (D-sub 15-pin) : Connects to the component signal input or analog RGB signal input of a piece of video equipment or a computer.

3RGB/COMPONENT IN (D-sub 15-pin) : Connects to the component signal output or analog RGB signal output of a piece of video equipment or a computer.

For details on inputting a component signal to the connector, see “Pin assignment” on page 47(GB).

Note

When the unit is not connected to an AC power or is in the standby mode, no signal is output from the

RGB/COMPONENT OUT.

10 (GB)