10-3 Items in the Basic Setup Menu
The basic setup menu contains the following items. | In the “Settings” column of the table, the factory | ||||
|
|
| default settings are underlined. | ||
|
|
|
|
|
|
Item number | Item name | Settings |
|
|
|
|
|
|
|
| |
001 | PREROLL TIME | 0S to 5S to 30S: Set the preroll time to between 0 and 30 seconds. A preroll | |||
|
| time of at least 5 seconds is recommended when using this unit for editing. | |||
002a) | CHARACTER H- | Adjust the horizontal screen position of the character information output from the | |||
| POSITION | COMPOSITE VIDEO OUTPUT 3(SUPER) connector, HDSDI OUTPUT | |||
|
| 3(SUPER) connector, and SDI OUTPUT 3(SUPER) connector for superimposed | |||
|
| display on the monitor. | |||
|
| 00 to 1E to 3C (59.94i, 29.97PsF, 23.98PsF mode)/00 to 1B to 36 (50i, 25PsF, | |||
|
| 24PsF mode): The hexadecimal value 00 is for the far left of the screen and | |||
|
| increasing the value moves the position of the characters to the right. | |||
003a), b) | CHARACTER V- | Adjust the vertical screen position of the first line of the character information | |||
| POSITION | output from the COMPOSITE VIDEO OUTPUT 3(SUPER) connector, HDSDI | |||
|
| OUTPUT 3(SUPER) connector, and SDI OUTPUT 3(SUPER) connector for | |||
|
| superimposed display on the monitor. | |||
|
| 00 to 57 to 6C (59.94i, 29.97PsF, 23.98PsF mode)/00 to 70 to 88 (50i, 25PsF, | |||
|
| 24PsF mode): The hexadecimal value 00 is for the top of the screen and | |||
|
| increasing the value lowers the position of the characters. | |||
004 | SYNCHRONIZE | When editing using this unit as a controller and an external VTR connected to this | |||
|
| unit via a | |||
|
| operate the two units in phase synchronization. | |||
|
| OFF: Do not operate in phase synchronization. | |||
|
| ON : Operate in phase synchronization. | |||
005 | DISPLAY INFORMATION | Determines the kind of character information to be output from the COMPOSITE | |||
| SELECT | VIDEO OUTPUT 3(SUPER) connector, HDSDI OUTPUT 3(SUPER) connector, | |||
|
| and SDI OUTPUT 3(SUPER) connector when F4 (CHARA) in function menu | |||
|
| page 4 is set to ON. |
|
|
|
|
| T&STA : Time data display information and the unit’s status | |||
|
| T&UB: Time data display information and the user’s bits | |||
|
| T&CTL: Time data display information and CTL | |||
|
| T&T: Time data display information and time code (LTC or VITC) | |||
|
| TIME: Time code (LTC or VITC) only | |||
|
| If there is an overlap between the setting of this item and the setting of the control | |||
|
| panel, it is automatically avoided. For example, if CTL is selected on the control | |||
|
| panel and this menu item setting is T&CTL, then CTL and LTC are output. | |||
|
|
|
|
| |
006 | LOCAL FUNCTION | Determines which buttons on the control panel are enabled when this unit is | |||
| ENABLE | controlled from external equipment. | |||
|
| DIS: All buttons and switches are disabled. | |||
|
| S&E&F : Only the STOP button, EJECT button, and F1 to F6 buttons are | |||
|
| enabled. |
|
|
|
|
| ENA: All buttons and switches are enabled. | |||
|
| MAP: Follow the LOCAL KEY MAP setting. | |||
|
| For information about setting the LOCAL KEY MAP, see menu item 023 LOCAL | |||
|
| KEY MAP (page | |||
|
|
|
|
| |
007 | TAPE TIMER DISPLAY | Determines whether to display the CTL count in | |||
|
| + | |||
|
| 24H: |
|
|
|
|
|
|
|
| |
008 | MONITORING | For | |||
| SELECTION FOR VTR- | determines whether the recorder is forced into | |||
| PLAYER button is pressed to view the player’s playback signals on the monitor. | ||||
|
| MANU : Do not force the recorder into | |||
|
| AUTO: Force the recorder into | |||
|
| ||||
a)When setting items 002 and 003, watch the monitor | b) | Note |
| ||
screen, and adjust to the required state. |
| When displaying time code values, there is a slight time | |||
|
|
| delay. Therefore, when creating a tape for |
editing, the information inserted in the upper half of the screen may be delayed by one frame.
(Continued)
Menus Setup 10 Chapter
Chapter 10 Setup Menus