Sony HDW-D2000 2-2Connector Panel

2-2 Connector Panel

Cooling fan	2Analog video input/output section (see page 2-16)
1Analog audio input/output	3Digital audio input/output section (see page 2-16)
section

75Ω

7Time code input/output section (see page 2-18)

8Audio monitor signal output section (see page 2-18)

4Digital signal input/ output section (see page 2-17)

Cooling fan

5Power supply section (see page 2-17)

6External device connectors (see page 2-17)

Parts of Function and Location 2 Chapter

1 Analog audio input/output section

1 AUDIO INPUT CH1 to CH4 connectors

2AUDIO INPUT CH1 to CH4 LEVEL switches

			AUDIO INPUT							CUE
CH1LEVEL		CH2LEVEL			CH3LEVEL		CH4LEVEL		IN LEVEL
LOW	HIGH	LOW		HIGH	LOW	HIGH	LOW	HIGH	LOW		HIGH
OFF	ON	OFF		ON	OFF	ON	OFF	ON	OFF		ON
	600Ω			600Ω		600Ω		600Ω			600Ω

		AUDIO OUTPUT		CUE
CH1	CH2	CH3	CH4	OUT

4CUE IN/OUT connectors

3AUDIO OUTPUT CH1 to CH4 connectors

1AUDIO INPUT CH1 to CH4 (channels 1 to 4) connectors (XLR 3-pin, female)

Input analog audio signals to channels 1 to 4.

You can record analog audio signals input to these connectors to any audio track on the tape.

2AUDIO INPUT CH1 to CH4 (channels 1 to 4) LEVEL switches

Set these for each channel as shown in the following table, according to the audio input levels to the AUDIO INPUT CH1 to CH4 connectors and the impedance.

AUDIO INPUT CH1 to CH4 LEVEL switch settings

Audio input level and impedance		Switch setting
Level	Impedance
–60 dBu	High impedance	LOW-OFF
(microphone input)	(approx. 20 kΩ)	(left position)
+4 dBu	High impedance	HIGH-OFF
(line audio input)	(approx. 20 kΩ)	(center position)
+4 dBm	600 Ω	HIGH-ON 600Ω
(line audio input)		(right position)

3AUDIO OUTPUT CH1 to CH4 (channels 1 to 4) connectors (XLR 3-pin, male)

These connectors output analog audio signals for channels 1 to 4.

4CUE IN/OUT (cue audio input/output) connectors (XLR 3-pin, female/male)

The IN connector inputs and the OUT connector outputs the cue audio signals.

Chapter 2 Location and Function of Parts 2-15