Press the F2 (USER) button.

3

4 The content of the setting is a character string (in this example “ABCD”). Select any character to change in the string by pressing the F3 (PREV) and F4 (NEXT) buttons.

The selected character flashes.

5 Rotate the MULTI CONTROL knob to display the

desired character in the position of the flashing character.

6 Repeat steps 4 and 5 for all of the characters that you want to change.

7 • If you do not want to change the other items (COUNTRY and ORGANIZATION), proceed to step 8.

•If you want to change the other items, press the F1 (ITEM) button and proceed as in steps 2 to 6.

8 Press the F5 (SET) button.

The changed settings are confirmed.

To cancel changes and exit the setup menu

Press the F6 (EXIT) button.

Time zone settings

The UMID uses the UTC (Coordinated Universal Time) time standard. Setting this unit’s built-in calendar clock to the local time, and then setting a time zone to indicate the difference from global UTC standard time allows correct UMIDs to be generated. To set the time zone, display the HOME page of the function menu and proceed as follows.

See Section 9-1-2 “Using the Function Menu” (page 9-2) for more information about function menu operations.

1 With the ENTRY button in the editing control section held down, press the F5 (MENU) button.

The error logger screen appears.

Refer to the Maintenance Manual Volume 1 for more information about the error logger.

2 Press the F5 (SET) button.

The OFFSET TO UTC item appears.

ERR OFFSET TO UTC

+09:00

 

 

 

LOG

PREV

NEXT

–

+

SET

EXIT

HOME

F1

F2

F3

F4

F5

F6

 

ERROR LOGGER

 

(014/023)

014

REFERENCE MISSING

015

A PB DATA

ERROR

016

V PB DATA

ERROR

TAPE ERROR

ON

WARNING

ON

CONDITION

ON

*OFFSET TO UTC

+09:00

Push SET button

2001 12 24

23:59:59

3 Press the F1 (PREV) or F2 (NEXT) button to select the OFFSET TO UTC item, and use the MULTI CONTROL knob or the F3 (–) and F4 (+) buttons to set the offset to UTC time.

For example, if the local time is 9 hours in advance of UTC, set to “+9:00”.

4 Press the F5 (SET) button.

This makes the setting effective.

Functions UMID 8 Chapter

Chapter 8 UMID Functions 8-3