Chapter10 SetupMenus
Menu items in the range 600 to 650, relating to the time code generator (Continued)
Item number | Item name | Settings |
|
|
|
608 | PHASE CORRECTION | Select whether or not to carry out phase correction control on the LTC generated |
|
| by the time code generator. |
|
| OFF : No control |
|
| ON: Carry out control. |
609 | TCG CF FLAG | Select whether or not the color framing flag is set in the blank bit of the time code |
|
| data. |
|
| OFF : Color framing flag is not set. |
|
| ON: Color framing flag is set. |
|
| AUTO: Color framing flag is set or not depending upon the color framing phase |
|
| relationship between the recorded video signal and the time code signal. |
|
| When AUTO is selected, color framing is controlled as follows according to the |
|
| operating mode of the time code generator. |
|
| • In INT PRESET mode (F1 (TCG) is set to INT and F2 (PR/RGN) set to PRESET |
|
| in function menu page 1, and in modes other than the automatic editing mode): |
|
| the time code signal is generated with color framing locked to the video signal, |
|
| and the color framing flag is set. |
|
| • In INT REGEN mode (F1 (TCG) is set to INT and F2 (PR/RGN) set to LTC or |
|
| VITC in function menu page 1, and in the automatic editing mode), and also in |
|
| EXT mode (F2 (PR/RGN) is set to EXT): the time code signal is generated |
|
| without color framing locked to the video signal, and the color framing flag is not |
|
| set. |
610 | REGEN CONTROL | Select whether or not the time code is automatically regenerated. |
| MODE | AS&IN : In automatic editing carried out in either assemble mode or insert mode |
|
| with this unit as the recorder, regardless of the settings of F1 (TCG) and F2 |
|
| (PR/RGN) in function menu page 1, the time code generator regenerates |
|
| according to the time code on the tape. |
|
| ASSEM: In automatic editing carried out in assemble mode with this unit as the |
|
| recorder, regardless of the settings of F1 (TCG) and F2 (PR/RGN) in function |
|
| menu page 1, the time code generator regenerates according to the time code |
|
| on the tape. |
|
| MANU: Regardless of whether this unit is the recorder or player, the time code |
|
| generator operates in accordance with the settings of F1 (TCG) and F2 (PR/ |
|
| RGN) in function menu page 1. |
|
| FULL: Whether local or remote and regardless of the settings of F1 (TCG) and |
|
| F2 (PR/RGN) in function menu page 1, when any of the ASSEMBLE, VIDEO, |
|
| CH1 to CH4, CUE and TC buttons is lit, the time code generator regenerates |
|
| according to the time code played back from the tape. |
617 | LTC OUTPUT PHASE | Set the output phase of time code signals (LTC). |
|
| TCG/R : Output the playback time code signal during playback. |
|
| When the edit preset function is on, and when recording, output the time code |
|
| signal generated by the internal time code generator. |
|
| INPUT: Use the same phase as the input video. |
|
| OUTPT: Use the same phase as the output video. |
|
| AUTO: Use the same phase as the input video when editing, and use the same |
|
| phase as the output video at other times (playback, recording, etc.) |
|
|
|
618 | UPCONV EMBEDDED | Select the source time code for |
| VITC | subjected to |
| (Invalid in 24PsF or | VITC : Select VITC recorded on |
| 23.98PsF mode) | LTC : Select LTC recorded on |
|
|
|
(Continued)