Sony HDW-D2000 manual 120

Menu items in the range 700 to 799, relating to video control

Item number	Item name		Settings
703	BLANK LINE SELECT		Switch blanking on or off for individual lines in the vertical blanking interval of the
	(Invalid in 24PsF or		SD video signal. The Y/C signal and odd/even fields are blanked simultaneously.
	23.98PsF mode)
	Sub-Item
	0	ALL LINE	- - - :Specify the blanking for each line separately.
			BLANK: Regardless of the setting of other sub-items, blank all lines which can be
				specified in this menu item.
			THROU: Regardless of the setting of other sub-items, switch off blanking for all
				lines which can be specified in this menu item.
In 625/50	9 to	LINE 9 to LINE 22	Specify blanking for lines 9 to 22.
mode (50i or	22		BLANK : Carry out blanking.
25PsF)			THROU: Switch off blanking.
	23	LINE 23	Specify blanking for line 23.
			HALF: Carry out half-blanking.
			THROU: Switch off blanking.
In 525/59.94	12 to	LINE 12 to LINE	Specify blanking for lines 12 to 19.
mode (SY)	19	19	BLANK : Carry out blanking.
(59.94i or			THROU: Switch off blanking.
29.97PsF)
	20	LINE 20	Specify blanking for line 20.
			BLANK : Carry out blanking.
			HALF: Carry out half-blanking.
			THROU: Switch off blanking.
In 525/59.94	12 to	LINE 12 to LINE	Specify blanking for lines 12 to 20.
mode (J)	20	20	BLANK : Carry out blanking.
(59.94i or			THROU: Switch off blanking.
29.97PsF)
	21	LINE 21	Specify blanking for line 21.
			BLANK : Carry out blanking.
			HALF: Carry out half-blanking.
			THROU: Switch off blanking.
705	EDGE SUBCARRIER		During recording and playback of a composite signal, in the playback circuit the
	REDUCER MODE		edge subcarrier reducer (ESR) is automatically switched on or off according to
	(Invalid in 24PsF or		the VTR operation. When recording a “Non-Standard” signal, for example, if the
	23.98PsF mode)		color edges are not as good as with a proper signal, the ESR can be forced on.
			This item makes this selection.
			AUTO : ESR is switched on and off automatically.
			ON: ESR operation is forced on.
707	FORCED VERTICAL		The “Y-add”a)function is normally switched on automatically during jog or variable
	INTERPOLATION OFF		speed playback. This item selects whether or not to force the “Y-add” function
			off.
			AUTO : Automatically switch the “Y-add” function on.
			OFF: Force the “Y-add” function off.
709	CAV LEVEL FORMAT		Select whether the analog component output should be D-1 or Betacam.
	(Valid only in 59.94i or
				Format	Color bars	Y video	Y sync	R–Y/B–Y
	29.97PsF mode)
				D-1 CAV	100/0/100/0	700 mV	300 mV	700 mV
				Betacam	100/7.5/77/7.5	714 mV	286 mV	700 mV
	Sub-Item
	0		Select the analog component output format.
		OUTPUT CAV	B-CAM :Betacam
		LEVEL	D1: D-1

a)The “Y-add” function is a circuit operation to interpolate the video signal vertically during jog or variable speed playback for the purpose of reducing the vertical

movement of the playback picture. (Continued)

Chapter10 SetupMenus

Chapter 10 Setup Menus 10-23