4-2 Playback

4-2-3 Dynamic Motion Control (DMC) Playback

Overview

DMC playback allows you to vary the playback speed for a certain section of a tape, in variable speed mode (from –1 to +2 times normal speed) and store the varying speed in memory for later playback at the same varying speed.

For example, during a live broadcast of a sporting event you can set the start and end points of highlights while recording, and then provide immediate DMC playback of those highlights.

During DMC playback the tape moves as shown in the following figure.

Playback and Recording 4 Chapter

On-air start point

Preroll point Speed variation start point

Speed variation end point On-air end point

Waiting for the on-air cue

Stop

 

 

 

 

before starting DMC

 

Press the REVIEW button.

 

playback

 

 

 

 

 

Press the REVIEW button again

Normal speed

 

 

playback

DMC playback

 

at the on-air cue.

 

 

Normal speed playback

 

 

 

 

 

 

 

Stop

Starting DMC playback

 

immediately after preroll

Press the PREVIEW button.

 

Normal speed

DMC playback

Normal speed playback

playback

Storing a varying playback speed in memory

To store the playback speed for DMC playback, use the following procedure.

Z

1 Press the DMC EDIT button, turning it on.

2 Either while playing back the recorded tape, or during recording, press the ENTRY button and one of the following buttons simultaneously, to set the start and end points.

•On-air start point: AUDIO IN button

•Speed variation start point: IN button

•Speed variation end point: OUT button

•On-air end point: AUDIO OUT button

Each press turns the corresponding button on.

1,4 5 2 7 3 3,4,6

4-10

Chapter 4 Recording and Playback