7:Attaching the jack cover and stand (continued)
Using the control center laid flat
Place the control center flat on a level surface.
Note
Do not apply downward force to the control center with the display window facing down. Doing so may cause scratched or damage to the control center.
Using the control center in the upright position
Make sure you attach the supplied stand.
To stand the control center on its side
1 Attach the stand to the screw hole on the side of the control center using the supplied screw.
2 Place the control center on the stand.
To stand the control center on its rear
1 Attach the stand to the jack cover using the supplied screw.
2 Place the control center upright on the stand.
Notes
•Use the supplied stand only when you use the control center in an upright position. Do not attach the stand when you use the control center laid flat.
•To move the control center, hold the control center itself. If you hold the stand, it may break.
•Do not use the control center in an upright position without attaching the stand. If you do not attach the stand, the control center will be unstable and may fall over.