Performing initial setup operations
Before using the system for the first time, initialize the system by performing the following procedure.
This procedure can also be used to return settings you have made to their factory defaults.
Checking if the sound comes from all speakers
Confirm that you can hear the test tone from each speaker.
N X x
TOP MENU/ | MUTING |
GUIDE | AV MENU |
FMASTER
VOL
G | g | MASTER VOL + |
| f |
|
| O |
|
DISPLAY | RETURN/EXIT | |
| TV/ | MAIN |
TV VOL | TV CH VIDEO | MENU |
| WIDE | TEST TONE |
TEST TONE
AV SYSTEM3
?/1
1 Press ?/1 to turn off the system.
2 Hold down ?/1 until “INITIAL” appears in the display.
The current function name appears. The following are reset to their factory settings.
•All settings in the SET UP and LEVEL menus.
•The sound field memorized for each function.
1 Press MASTER VOL +.
(Optimal volume level: Between
2 Press TEST TONE.
You will hear the test tone from each speaker in sequence.
Front (left) t Center t Front (right) t Surround (right) t Surround (left) t Subwoofer
While outputting the test tone, if no sound comes from the speakers or the test tone is output from the speaker whose name is not displayed in the display, there is a short- circuiting or the connection is wrong. In this case, check the speaker connection again.
3 Press TEST TONE again to turn off the test tone.