If the factory settings of the function buttons on the remote do not match your system components, you can change them. For example, if you have an MD player and you do not have a DVD player, you can assign the DVD button to your MD deck.
1 Hold down one of the function buttons on the remote (VIDEO/DVD/SAT/TV/ AUX/TUNER) whose function you want to change.
Example: Hold down DVD.
2 Press the corresponding button of the component you want to assign to the Function button.
Example: Press m (for MD deck).
The following buttons are assigned to select the functions:
To operate | Press |
VCR (command mode VTR 1*) | 1 |
|
|
VCR (command mode VTR 2*) | 2 |
|
|
VCR (command mode VTR 3*) | 3 |
|
|
DVD player | 4 |
|
|
TV | 5 |
|
|
DSS (Digital Satellite Receiver) | 6 |
|
|
Tuner | 0/10 |
|
|
CD player | 12 |
|
|
MD deck | m |
|
|
LD player | M |
|
|
*Sony VCRs are operated with a VTR 1, 2 or 3 setting. These correspond to Beta, 8mm and VHS respectively.
To reset all the function buttons to their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at the same time.
Use the SET UP menu to set the types of the speakers connected to the subwoofer.
1 Press MAIN MENU repeatedly to select SET UP menu.
2 Move the V/v/B/b button up or down
to select the parameter.
3 Move the V/v/B/b button to left or right to select the setting.
4 Repeat steps 2 and 3 to adjust the other parameters.
Speaker setup parameters
The initial setting is underlined.
x Front speaker distance ( L R DIS.)
Initial setting: 3.5 m
Lets you set the distance from your listening position to the front speakers (A on page 9). You can adjust from 1.0 meter to 10.0 meters in 0.1 meter steps.
If both front speakers are not placed an equal distance from your listening position, set the distance to the closest speaker.