Getting Started

1: Unpacking

Check that you following items are supplied:

Control center (1)

Subwoofer (1)

Micro satellite speakers (5)

Jack cover (1)

Screws (for jack cover) (2)

Control center stand (1)

Screw (for control center stand) (1)

Remote commander RM-U25 (1)

R6 (size AA) batteries (2)

Speaker cords (long) (2)

Speaker cords (short) (3)

System cord (1)

Optical digital cord (1)

Speaker foot pads (20)

Speaker sticker (1)

Traction pads (4)

Hexagonal wrench (1)

This Operating Instructions (1)

Speaker installation guide (1)

Inserting batteries into the remote

Insert two R6 (size-AA) batteries with the + and – properly oriented in the battery compartment.

Tip

Under normal conditions, the batteries should last for about 6 months. When the remote no longer operates the control center, replace both batteries with new ones.

Notes

Do not leave the remote in an extremely hot or humid place.

Do not use a new battery with an old one.

Do not expose the remote sensor of the control center to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Turn off the power to all components before making any connections.

Be sure to make connections firmly to avoid hum and noise.

4GB