Recording in mirror mode

 

Displaying the recording setup

 

 

information – Status check

 

 

 

You can turn the LCD panel towards the subject so that you and your subject can share the image being recorded. You can also utilize this function when recording yourself, or to keep the attention of small children attracted to the camcorder while you record them.

Up to about 100 degrees

You can check the setup value of the following items in the standby mode or during recording.

•Audio setup such as microphone volume level (p. 37)

•Output setup ([COMPONENT], [i.LINK CONV], and [DOWN CONVERT] settings) (p. 73)

•Functions assigned to the ASSIGN buttons (p. 86)

•CAMERA setting

•Picture profile setup (p. 34)

Open the LCD panel 180 degrees, then rotate it towards the subject until it clicks.

A mirror-image of the subject appears on the LCD screen, but the picture will be normal when recorded.

1 Press STATUS CHECK.

2 Turn the SEL/PUSH EXEC dial to display the desired item.

Each time you turn the dial, the items appear in the following order: AUDIO t OUTPUT t ASSIGN t CAMERA t PICT. PROFILE

24Recording