Connecting an analog VCR to the computer via your camcorder
– Signal conversion function
Connect an analog video device to your camcorder using the A/V connecting cable
(supplied), and a digital device such as a computer to your camcorder using an i.LINK cable (optional). Your camcorder converts the analog video signal from the VCR to a digital signal and transmits it to the computer to be dubbed.
To use the signal conversion function, application software to import video signals must be installed on the computer.
Connecting a computer
Refer to the manual supplied with the application software for the system requirements of the computer.
When you have an S video jack on your VCR
S video cable (optional)
AUDIO/VIDEO jack
| Yellow |
A/V connecting | White |
cable (supplied) | Red |
|
HDV/DV jack
i.LINK cable (optional)
Signal flow
bNote
•Select the (OTHERS) menu, [DISP OUTPUT], then [LCD PANEL] (the default setting) (p. 80). cable connected, the computer may hang up or may
•Before connecting the i.LINK cable, select the (IN/OUT REC) menu, [VCR HDV/DV], then [DV] (p. 70). If you do this operation with the i.LINK
not recognize this camcorder.
104Dubbing/Editing