Playback
Symptom | Cause and/or Corrective Actions |
|
|
Cannot play back. | cIf the tape has reached the end, rewind the tape (p. 48). |
Cannot play back in reverse direction. cReverse playback is not possible with the tape recorded in the HDV format.
Horizontal lines appear on the | cClean the head using the cleaning cassette (p. 121). | |||
picture. The displayed pictures are |
|
|
|
|
not clear or do not appear. |
|
|
|
|
|
|
| ||
Fine patterns flicker, diagonal lines | cAdjust [SHARPNESS] to the – (soften) side in the PICTURE PROFILE | |||
look jagged. | function (p. 34). |
| ||
|
|
|
| |
No sound or only a low sound is | cTurn up the volume (p. 48). |
| ||
heard. | cOn the |
| (AUDIO SET) menu, set [AUDIO MIX] to [MIX] (p. 64). | |
| ||||
| ||||
| cWhen you are using an S VIDEO cable or a component video cable, | |||
| make sure the red and white plugs of the A/V connecting cable are | |||
| connected as well (p. 52). |
| ||
|
|
| ||
The sound breaks off. | cClean the head using the cleaning cassette (p. 121). | |||
|
|
| ||
The date search and index search do | • There is a blank section at the beginning or in the middle of the tape. This | |||
not work. | is not a malfunction. |
| ||
|
|
| ||
The time code does not return to | • The time code at the beginning of recording may not appear correctly, | |||
00:00:00:00 even if the tape was | however, this is not a malfunction. If you start playback, both time code | |||
rewound to the beginning of | and picture are displayed correctly from the beginning. | |||
recording. |
|
|
|
|
|
|
| ||
• | ||||
during | ||||
| during playback, and [00 00 00 00] during | |||
|
|
| ||
• The tape you are playing was recorded without setting the date and time. | ||||
| • A blank section on the tape is being played. | |||
| • The data code on a tape with a scratch or noise cannot be read. | |||
|
|
| ||
END SEARCH does not work. | • The POWER switch is set to CAMERA. | |||
| • The cassette was ejected after recording (p. 50). | |||
| • The cassette is new and has nothing recorded. | |||
|
|
| ||
END SEARCH does not work | • There is a blank section at the beginning or in the middle of the tape. This | |||
correctly. | is not a malfunction. |
| ||
|
|
| ||
No picture appears during END | • The tape was recorded in both HDV and DVCAM (DV) formats. This is | |||
SEARCH or Rec Review. | not a malfunction. |
| ||
|
|
|
| |
Cannot view the picture or hear the | cSet [COMPONENT] on the | (IN/OUT REC) menu according to the | ||
sound on the TV connected with the | requirements of the connected device (p. 73). | |||
component video cable. | cWhen you are using the component video cable, make sure the red and | |||
| white plugs of the A/V connecting cable are connected (p. 52). |
Troubleshooting
Troubleshooting 109