Importing a picture to the computer
1 Turn on the analog device.
2 Set the POWER switch to VCR.
Connect your camcorder to the wall outlet using the supplied connecting cable (DK-
415)and AC Adaptor/charger for the power supply.
3 Press MENU.
•You cannot import pictures that have been recorded using a copyright protection signal to a computer via your camcorder.
•Analog signals are not output from the COMPONENT OUTPUT jack.
4 Select the (IN/OUT REC) menu by turning the SEL/PUSH EXEC dial, then press the dial.
5 Select [A/V t DV OUT] by turning the SEL/PUSH EXEC dial, then press the dial.
6 Select [ON] by turning the SEL/PUSH EXEC dial, then press the dial.
7 Press MENU to hide the menu screen.
8 Start playback on the analog device.
9 Start importing on the computer.
Refer to the manual supplied with the program software or its
After importing the picture and sound
Stop importing on the computer, and stop playback on the analog device.
bNote
•Your camcorder may not be able to output the signal to the computer correctly depending on the video signal input to your camcorder.
Dubbing/Editing
Dubbing/Editing 105