INPUT1 LEVEL

Select the input signal from the INPUT1 connector, either from a microphone or an audio device.

GMIC

Select to input an audio signal from a microphone connected to the

 

INPUT1 connector.

 

appears on the status check display.

 

 

 

 

 

LINE

Select to input an audio signal from an audio device connected to the

 

INPUT1 connector.

 

 

appears on the status check display.

 

 

 

 

 

 

 

 

INPUT1 TRIM

You can select the level of input signal from the INPUT1 connector. This setting is effective only when [INPUT1 LEVEL] is set to [MIC].

-18 dB, -12 dB, -6 dB, 0 dB, +6 dB, +12 dB are available. It is set to 0 dB in the default setting.

INPUT1 WIND

This setting is effective only when [INPUT1 LEVEL] is set to [MIC].

GOFF

Select when you want to record the sound from the INPUT1 connector

 

as it is, without reducing the noise caused by wind.

 

 

 

ON

Select to reduce the noise caused by wind.

appears on the status

 

check display.

 

 

 

 

INPUT2 LEVEL

Select the input signal from the INPUT2 connector, either from a microphone or an audio device.

GMIC

Select to input an audio signal from a microphone connected to the

 

INPUT2 connector.

 

appears on the status check display.

 

 

 

 

LINE

Select to input an audio signal from an audio device connected to the

 

INPUT2 connector.

 

appears on the status check display.

 

 

 

 

 

 

INPUT2 TRIM

You can select the level of input signal from the INPUT2 connector. This setting is effective only when [INPUT2 LEVEL] is set to [MIC].

-18 dB, -12 dB, -6 dB, 0 dB, +6 dB, +12 dB are available. It is set to 0 dB in the default setting.

INPUT2 WIND

This setting is effective only when [INPUT2 LEVEL] is set to [MIC].

GOFF

Select when you want to record the sound from the INPUT2 connector

 

as it is without reducing the noise caused by wind.

 

 

 

ON

Select to reduce the noise caused by wind.

appears on the status

 

check display.

 

 

 

 

Menu the Using

Using the Menu 67