5 Select [PRESET] by turning the SEL/ PUSH EXEC dial, then press the dial.
6 Select the first 2 digits by turning the SEL/PUSH EXEC dial, then press the dial.
7 Repeat step 6 to set up the other digits.
8 Select [OK] by turning the SEL/PUSH EXEC dial, then press the dial.
9 Press MENU to hide the menu screen.
To cancel the user bits setting
Select [CANCEL] in step 8.
To reset the user bits
Select [RESET] in step 5.
To set the user bits to the real time clock
Select the (TC/UB SET) menu, [UB TIME REC], then [ON].
bNote
•
•When you input HDV format signal via i.LINK connection, the
Switching the time value
Press
Each time you press the button, the time value |
| ||
Dubbing/Editing | |||
changes between the time code and user bits. | |||
TC: 00:00:00:00 or 00:00.00:00 | |||
| |||
| |||
|
|
| |
b Note |
| ||
• The time code and user bits cannot be displayed |
| ||
properly if the tape does not have time code and/or |
| ||
user bits recordings or if the time code was recorded |
| ||
using a |
| ||
• When you input HDV format signal via i.LINK |
| ||
connection, the |
| ||
written on this camera, however, they are not |
| ||
displayed during dubbing. |
|
Dubbing/Editing 103