Step 2: Charging the battery pack

You can charge the battery by attaching the

“InfoLITHIUM” battery pack (L series) to

the AC Adaptor/charger.

bNote

•You cannot use batteries other than the “InfoLITHIUM” battery pack (L series) (p. 117).

•Do not short-circuit the DC plug of the AC Adaptor/ charger with any metallic objects. This may cause a malfunction.

•Use a nearby wall outlet when using the AC Adaptor/charger. Disconnect the AC Adaptor/ charger from the wall outlet immediately if any malfunction occurs.

To the wall outlet

Power cord

Battery pack

Charge lamp

Mode switch

Display window

AC Adaptor/charger

1 Set the mode switch to CHARGE.

2 Connect the power cord to the AC Adaptor/charger.

3 Connect the power cord to the wall outlet.

4 While pressing the battery back down,

slide it in the direction of the arrow. The charge lamp lights up and charging starts.

When the battery was successfully charged

The battery mark on the display window will

 

light up in the shape of a full battery (

 

) that

 

 

 

indicates that the battery has been sufficiently

Getting

charged for use.

 

 

 

 

 

If you continue charging until the CHARGE

 

lamp turns off and FULL appears on the display

started

window, the battery has now been fully charged

 

and can be used for a little longer period. Remove the battery pack from the AC Adaptor/ charger.

To attach the battery pack to the camcorder

Press the battery pack and slide it down.

To remove the battery pack

1Set the POWER switch to OFF.

,continued

Getting started 11