Playback
Viewing moviesMake sure you have a recorded cassette inserted into your camcorder.
Some of the operations are possible using the Remote Commander.
When you want to play back recordings on your TV, see page 52.
When playing back the tape, select the (IN/OUT REC) menu, [VCR HDV/DV], then [AUTO] (the default setting).
POWER switch
1 Open the LCD panel and adjust the angle.
2 While pressing the green button, set the POWER switch to VCR.
3 Press m (rewind) to go to the point you want to view.
4 Press N (play) to start playback.
To adjust the volumeAdjust the volume by pressing VOLUME
– (decrease) / + (increase).
To stop playbackPress x (stop).
To pausePress X (pause) during playback.
Press N (play) or X (pause) again to restart the playback.
Playback stops automatically when the pause mode continues for more than 3 minutes.
To fast forward or rewindPress M (fast forward) or m (rewind) in stop mode.
To review movies on the viewfinderClose the LCD panel. Then, adjust the viewfinder angle.
Indicators displayed during tape playback
|
|
|
|
|
|
60min |
| 00:00:00:00 |
| ||
HDV1080i |
|
|
| 60min |
|
|
|
|
|
|
|
AFormat of the playback signal (HDV1080i/ DVCAM/DV SP)
BRemaining battery
C50i/60i system indicator (p. 82)
DTape transport indicator
ETime code or user bits
FRecording capacity of the tape
48Playback