Digital Audio Interface Connectors, Format, Weight | Lexicon PCM 80

PCM 80 User Guide

Lexicon

Digital Audio Interface	Connectors:	Coaxial, RCA type
	Format:	conforms to S/PDIF IEC-958 consumer standards
	Sample Rates:	44.1 kHz, 48 kHz
Internal Audio Data Paths	Conversion:	18 bits
	DSP:	18 to 24 bits
Audio Memory Configuration	Base memory:	Two 256k x 18 DRAMs
	User
	Expansion:	Two SIMM sockets provided for either 1 Meg x 9,
		4 Meg x 9 or 16 Meg x 9, 70 nsec DRAM modules
External Memory Card	Connector:	Accepts PCMCIA Type I cards, 68 pins
	Standards:	Conforms to PCMCIA 2.0 / JEIDA 4.0
	Card Format:	Supports up to 1MB SRAM (attribute memory not required)
Control Interface	MIDI:	5-pin DIN connectors provided for MIDI IN, THRU, & OUT
	Footswitch:	1/4 inch T/R/S phone jack provided for
		2 independent momentary footswitches
		System detects normal-open, or normal-closed on power up
	Foot controller: 1/4 inch T/R/S phone jack provided for footpedal
		(100Ω minimum, 10kΩ maximum impedance)
General	Dimensions:	19.0"W x 1.75"H x 12.0"D (483 x 45 x 305 mm)
		19 inch rack mount standard, 1U high
	Weight:	Net: 6.4 lbs (2.9 kg)
		Shipping: 9.5 lbs (4.3 kg)
	Power
	Requirements:	100-240 VAC, 50-60 Hz, 35 W, 3-pin IEC power connector
	RFI/ESD:	Conforms to FCC Class B,
		EN55022 Class B (CE), IEC 801-2, IEC 801-3
	Environment:	Operating temperature: 32˚ to 104˚F (0˚ to 40˚C)
		Storage temperature: -22˚ to 167˚F (-30˚ to 70˚C)
		Humidity: maximum 95% without condensation

Unless otherwise noted, all audio specifications assume rear-panel switch set to BAL, input level control is set for unity gain (0dB), and analog I/O connections wired for balanced configuration.

Specifications subject to change without notice.

7-2

Image 134

Lexicon PCM 80 Digital Audio Interface Connectors, Format, Sample Rates, Internal Audio Data Paths Conversion, Standards

Contents

PCM Precautions Unpacking and Inspection PCM Vigtig information om sikkerhed Wichtige Sicherheitsanweisungen Contents Contents, contd . The Algorithms and their Parameters Presets Contents, contd Introduction Editing Expansion User Interface Block Diagram Program Banks HeadroomUp/Down Load Balanced Outputs AC PowerFootswitch Input Level Mono Applications Footswitch/Foot ControllerAnalog Audio Digital Audio Overload Headroom DisplayUnbalanced Balanced Setting Analog and Digital Input Level Setting Output Level Press Control ConfigurationsConnection to a mixing consoles effects sends Global Pin Simm Memory Module Memory CardsPcmcia Sram Memory Card 68 pin, Type Basic Operation Xxxxxxx Bypass currently selected Row Audio Word Clock Audio Word Clock Ext Prf 44.1kHz Cns 48kHz Error Log Dig In Status Analog In Lvl Dig In Lvl Auto Lock Scms Output Level Mix ModeEmphasis Bit Pgm Bypass Tempo ModeBypass Mode/Bypass Src Auto Load Patch UpdateMem Protect Initialize Row Card Bank Copy Receive ResetFormat Transmit Chain OffMap Int Clock Send Foot Pedal, Foot Sw 1, Foot Sw 2, AdjustAutomation SysEx Default Setting Row Setup StoreControl Mode Matrix Location Tempo Mode Matrix Location Pgm Assign Row Mapx Map 0 and MapRow Chain Map Program and Register Banks Chorus+Rvb Register Tempo Mode Source Row Tempo RateBeatValue Average Row Tap Tap DurationTap Source and Tap Level Prime Blue Soft Row Compare is on Stored effect active Tempo Rate and BeatValue Tap Duration and Average Turning MemoryProtection Off Renaming the Adjust Knob Patch Register Location Concert Hall Plate Band+Rvb Mod Sw Entering Soft Row Assign About Sources Patch Sources Internal Rate, Shape, P Width, Depth Attack, Release, ModeEnv L Release Env R Rate, P Width, Mode Assigning Values Jump Jump contd Default valuesPatching Examples Creating a patch with Patch 1 Dst Unassigned Adjusting the modulation Source parameters Changing the default destination values Adding an additional pivot point to the patch Patch Values 000 Multiple Patches with the Same Destination Algorithms and Their Parameters 4-Voice Algorithms Reverb Shell Algorithms and Their Parameters PCM 80 User Guide Lexicon Algorithms and Their Parameters PCM 80 User Guide Lexicon Algorithms and Their Parameters 6-Voice Algorithms Algorithms and Their Parameters PCM 80 User Guide Lexicon Chorus+Rvb contd PCM 80 User Guide Lexicon Band+Rvb contd Resonant Chord Algorithms Res1Plate Res2Plate Resonant Chord Algorithms Res1Plate Res2Plate contd MstDepth and MstRate Voices Depth and Rate InLvl L&R, InPan L&R FX AdjustMix High Cut Controls contd. FX Width Value Display Label Description GldResp Master, GldResp, GldRange, ClearClear Master GldRange Expanded Delay Time Delay Time contdAlgorithm Delay Time Voices Mstr Fbk, Mstr X-Fbk Voices 1-6 Fbk, X-Fbk Gld Lvl Mstr LC/HCV1-V6 LoCut and HiCut Left a Lvl L and a Dly L Fbk L/R Glide FX contd Mod LFO Mod AR Env Modulation contd Mod Env L and Mod Env R Modulation contd. Mod Latch Width Mod Sw 1 and Mod Sw Modulation contdMode, T Lvl and T Src Rate Mode Panning PCM 80 Patch Sources DstValues Assign TuningRes 1Plate Pitch parameters Active Res 2Plate Pitch parameters Pitch contd V1-V6 Pitch Algorithms and Their Parameters Size Mstr Res,Mstr HCV1Res,V1 HiCut-V6 Res,V6 HiCut Duration Depth Shape, Spread Rvb Design contdDef Spin Low Slope and Mid Slope Pre DelayMid Rt and Low Rt Crossover PstMix, PstGld RefLvl L&R, RefDly L&REkoFbk L&R,EkoDly L&R Pst Mix PCM 80 User Guide Lexicon Matrix Bank Location Preset Type Program Bank 0 P0 Multi Effects P0 0.0 P0 Eko FlangeADJUST X-Fbk Flange Rvb Adjust FX MixFlange+RvbADJUST FX Mix Glide VerbADJUST FX Mix Modulation Effects P0 2.0 P0 3.5 contd Special Effects P0 3.6- P0 Special Effects P0 3.6- P0 4.9 contd Rhythmic Echo Delay Effects P1 0.0 P1Program Bank 1 P1 Rhythmic Echo and Delay Effects P1 0.0 P1 3.6 contd Pan-Eko Bpmadjust DarkKnob LatchedEkos Adjust EchoWidthPanEQ Bpmadjust Low Tone Tempo VerbADJUST Liveness Chase EchoADJUST ChaseRate BandEkoSweepADJUST Mstr FbkLFO EQ EchoADJUST LC Depth Panned DlysADJUST Mstr Fbk Ambience Effects P1 3.7 P1 EQ Effects P2 0.0 P2 Program Bank 2 P2Ambience Effects P1 3.7 P1 4.9 contd EQ Effects P2 0.0 P2 1.0 contd Spatial Effects P2 1.1 P2 Spatial Effects P2 1.1 P2 2.4 contd Gain Effects P2 2.5 P2 Gain Effects P2 2.5 P2 4.0 contd Chord WalkADJUST High Cut Pedal SwellADJUST FX MixRez Climber Adjust Tuning Mars BarsADJUST High Cut Reverb Effects P3 0.0 P3 Program Bank 3 P3Resonant Chord Effects P2 4.1 P2 4.9 contd Reverb Effects P3 0.0 P3 2.8 contd Drum GateADJUST Duration Plate4 Horns Adjust ImpactAlley SlapADJUST Pre Delay Slope Down Adjust Duration SweepVerbADJUST GldResp Dyna Vibrato Adjust GlideVibroVerbADJUST V-Depth EnveloVerbADJUST Rt HC0-40 Remix Effects P3 4.0 P3 4.9 contd Alphabetical Index of Presets PCM 80 User Guide Lexicon Selecting a Midi Channel Accessing Programs Registers Midi Operation PCM 80 Tempo 0.2 Source set to Midi Midi Tempo Control Using the PCM 80 as a Midi Clock SourceControlling PCM 80 Tempo Rate with Midi Clock Control 3.7 Midi SysEx set to Receive On PCM 80sControl 3.4 Automation set to On Slaving two or more Midi Transmit Midi Adjust Program Change Messages Automation Reset All ControllersMidi Clock and Clock Commands SysEx Automation Dynamic Midi Displayed Name Description Yes Midi Implementation ChartFunction Transmitted Recognized Remarks OX Selectable PCM 80 User Guide Lexicon Common Midi Problems PCM 80 doesnt respond to SysEx commandsPCM 80 does not transmit SysEx Automation commands Midi Program Change numbers are off by No Digital Audio Output No Effects Output Restoring Factory Default Settings PCM 80 User Guide Lexicon Delay Audio Input ConnectorsAudio Output Connectors Impedance External Memory Card Connector Digital Audio Interface ConnectorsAudio Memory Configuration Base memory Footswitch Lexicon Inc Oak Park Bedford MA Telephone Fax