Lexicon PCM 80 manual Restoring Factory Default Settings

You can restore the PCM 80 to its default state without erasing registers by restoring the factory default setup:

1.Press Control.

2.Use the Up and Down buttons to locate Row 4 Setup.

3.Turn SELECT to 4.1 Load.

4.Turn ADJUST counterclockwise to select "Factory Settings".

5.Press Load/✱. The PCM 80 will display the message "Setup restored".

The following table shows the parameters which comprise a setup, along with the factory default setting of each parameter.

Control Mode
Matrix Location		System Parameter	Default Setting
Audio	0.0	Word Clock	Internal 48kHz
	0.1	Analog Lvl	100%
	0.2	Digital Lvl	0%
	0.3	Auto Lock	Off
	0.4	SCMS	Multi Copy
	0.5	Emphasis Bit	Pass Thru
	0.6	Output Level	+4dBu
System	1.0	Edit Mode	Go
	1.1	Mix Mode	Pgm
		Global Mix Value	100% Wet
	1.2	Tempo Mode	Pgm
		Global Tempo Value	120 BPM
	1.3	Bypass Mode	InputMute
		Bypass Src	Off
	1.4	Pgm Bypass	AllMute
	1.5	Mem Protect	On
	1.6	Auto Load	Off
	1.7	Patch Update	Delayed
MIDI	3.1	Receive	OMNI
	3.2	Transmit	1
	3.3	Pgm Change	On
		Pgm+	Off
		Pgm–	Off
		Map select	0
		Chain	MIDI
	3.4	Automation	Off
	3.5	Footpedal	None
		Sw 1	None
		Sw 2	None
		ADJUST	None
	3.6	Int Clock	Off
	3.7	SysEx	On
		Device ID	0
	3.9	Dump Speed	Slow
Tempo Mode
Matrix Location		System Parameter	Default Setting
Tempo	0.2	Source	Internal
Tap	1.3	Display	On

Troubleshooting

Restoring Factory

Default Settings

6-3