Lexicon PCM 80 manual the running effect

MIDI Operation

Each PCM 80 preset has a unique soft knob patch that allows you to control the Controlling the Soft Knob effect directly from Program or Register Banks mode with the ADJUST knob. with MIDI

You can also control the soft knob patch remotely from MIDI, or from the Foot Pedal.

To control the soft knob with MIDI, set Control mode 3.1 (Receive) to the desired MIDI Channel. Set Control mode 3.5 (ADJUST) to the desired MIDI Controller such as Mod Wheel.

MIDI ✱ADJUST

3.5 Send		Mod Wheel
Now, the Mod Wheel on the MIDI instrument will control the soft knob patch of
the running effect.
If you have a foot pedal connected to the PCM rear panel Foot Controller jack,			Controlling the Soft Knob
you can use it to control the soft knob patch. (Note that no MIDI connections are			with a Foot Pedal
required to do this.)
Set both Control mode 3.5 ADJUST and Control mode 3.5 Foot Pedal to the
same MIDI Controller.
MIDI	✱ADJUST
3.5	Send	Ctl 3
MIDI	✱Foot Pedal
3.5	Send	Ctl 3

Now, the foot pedal will control the soft knob patch of the running effect.

5-5