PCM 80 User Guide | Lexicon |
|
The Front Panel
Headroom
INPUT
Adjusts analog input level.
Up/Down
Press to move up and down through a pro- gram, register, or pa- rameter matrix.
Program Banks
Enables selection of factory presets. Press repeatedly to cycle selection of 4 internal preset banks. Press and hold to display the name of the current bank.
Load/✽
In Program or Regis- ter mode, loads the selected program. In Edit mode, scrolls through any
Display
Two rows of 20 alpha- numeric characters display effect names and ID numbers, and parameter names and values.
Register Banks
Enables selection of user memory. If a RAM card is loaded into the Memory Card slot, each press of this but- ton selects a new reg- ister bank. Press and hold to display the name of the current bank.
Store
Initiates register store function.
ADJUST
In Edit mode, changes values of parameters chosen with SELECT. With Program Banks or Register Banks se- lected, behaves as a soft knob for patched parameters.
Edit
Enables parameter selection for editing of values.
Compare
Active in Program, Register, and Edit modes. Press to com- pare the active version of the current effect with the most recently stored version.
SELECT
Scrolls through pre- sets, registers or pa- rameters. With Pro- gram Bank or Register Bank selected, scrolls through the 50 pro- grams in the selected bank. With Edit se- lected, scrolls only through the param- eters of the active row.
Control
Enables selection of system and global pa- rameters.
Bypass
Bypasses or mutes audio, depending on the setting of each program's bypass pa- rameter.
POWER
On/Off.
Memory Card
Slot for optional preset ROM or register RAM cards. Press Eject button to remove card.
Tempo
Press to display tempo rate and to initiate tempo functions. LED flashes in time with current tempo rate.
Tap
Sets tempo. Press twice in rhythm to es- tablish tempo rate. Press once to reset LFO.
